New Furnace Not Heating? Common Causes and What to Do
Get the Comfort You Deserve
A new furnace should mean at least a few years of uninterrupted warmth and comfort. But what do you do if your new furnace isn’t heating your space properly? In this guide, we’ll cover common causes of a new heater not functioning, offer advice on what to do, and share tips to help protect your new HVAC investment.
Why Isn’t My New Furnace Heating My Home?
Dealing with furnace problems in an older unit is one thing, but what about a brand new heater that isn’t keeping your home warm? There are a few common causes for furnace issues in new systems:
- Incorrect thermostat settings preventing the system from running
- Tripped electrical breakers
- Unsecured access doors and panels
- Blocked HVAC vents
- Dirty furnace air filters
- Installation issues
- Improper furnace sizing
The Furnace May Not Be the Problem
Odds are, your brand new furnace isn’t the issue. Before you shell out for unnecessary furnace repair, confirm the thermostat is set correctly, double-check that your electrical panel isn’t tripping breakers when you try to power the unit, and make sure your air filter has been replaced recently. If these don’t solve the issue, you may have an installation problem.
Common Installation Problems That Can Affect a New Furnace
One of the most common reasons for a new furnace not turning on or delivering no heat is a mistake during installation. With gas furnaces, the issue might be an incorrect gas pressure setting. As a failsafe to prevent dangerous gas leaks, most systems won’t run at all if the gas supply isn’t working correctly.
The system’s electrical components may also be to blame. A loose wire on the control board or a misconfigured wire in the thermostat can be enough to prevent the furnace from turning on or blowing warm air.
Is Your New Furnace the Right Size for Your Home?
The final possible furnace installation issue is the unit’s size. If the system is too small for your home, it will strain to run and eventually shut down under the stress. If it’s too large, it will rapidly turn on and off (short-cycling), which can also lead to premature shutdown.
This is why proper sizing is such an important part of the furnace replacement process. It ensures your new system can keep up with your home’s heating needs, helping you get more out of the heater over the years.
Could Your Ductwork Be Keeping Your New Furnace From Heating Properly?
If the unit is on, but it feels like the furnace isn’t blowing, the issue might be with your ductwork. If ducts are damaged, leaking, or clogged with dust and debris, they can stop warm air from circulating through the home. Over time, this lack of airflow can also damage your brand-new furnace, so it’s a good idea to clean your ductwork at the same time as other heating maintenance tasks.
Why Is My New Furnace Running but My House Still Feels Cold?
Typically, a cold home with a new furnace running indicates a problem with the ductwork, air filter, or with your home’s air sealing and insulation. As we mentioned, leaking ductwork can sap heat energy from your home before it has a chance to warm the space, while restricted airflow can prevent much hot air from leaving the furnace at all. In some cases, a cold house means you have severe air leaks or lack insulation, so much of the heated air escapes outside.
What If My New Furnace Turns On and Then Shuts Off?
If your new furnace turns on and then shuts off very quickly, it’s likely a sizing issue. This is known as short-cycling, and most often happens when the unit is too big for the space. It achieves the set temperature too quickly, then shuts down the furnace, only to start up again a few minutes later. All of this resetting wears out system components faster, meaning you’ll pay for more heating repairs over time.
Why a Whole-Home Performance Analysis Matters With a New Furnace
Understanding your HVAC system scientifically can help you enjoy a more comfortable home and a significantly lower energy bill. While your aging furnace might be part of the reason your home feels cold, your issues could also stem from air leaks, poor insulation, windows, and the condition of your ductwork. These factors also influence HVAC sizing, which is why you should always get the whole-home performance analysis before investing in a new furnace.
Check These Simple Things Before Calling for Furnace Service
With a little knowledge of furnace maintenance and furnace troubleshooting, you may be able to save yourself some money on service fees from heating repair pros:
- Double-check thermostat settings.
- Look at your electrical panel for tripped breakers.
- Learn when to replace your furnace air filter.
- Confirm that the dedicated toggle switch for the heater is flipped on.
- Open all vents and registers and make sure they aren’t blocked by furniture or rugs.
- Make sure the gas valve is open.
If these steps don’t resolve the issue, you’ll need a professional to inspect and test the furnace to diagnose and fix the problem.
When Should You Call an HVAC Professional About a New Furnace?
If your current furnace is more than 10 to 15 years old, constantly breaking down or needing repairs, or costing you more and more on your energy bills despite following best practices for furnace maintenance, it’s time to consider replacing the system. New furnaces are more energy efficient, quieter, and more reliable than older systems, helping you save money over time through lower energy costs — not to mention fewer repair bills.
Can a New Furnace Be Repaired, or Does It Need to Be Replaced?
Should you repair or replace your furnace? If your furnace is less than 10 to 15 years old, needs only occasional fixes, and uses energy consistently, it’s worth hiring a furnace repair company when there’s an issue. Otherwise, you’ll ultimately save more money by investing in a modern, reliable unit.
How On The Mark Heating & Air Helps Schaumburg Homeowners Get the Most From a New Furnace
At On The Mark Heating & Air, we believe in helping homeowners make their equipment work better for them, rather than trying to sell new HVAC equipment whenever possible. That means looking at the performance and efficiency of the entire home, factoring in air leaks, insulation, and ductwork, and looking at each home heating project holistically to find the best way to improve your comfort. We also help you get more out of your system with smart thermostats, regular duct cleaning, and the many benefits of regular furnace maintenance.
Get Your New Furnace Heating Properly Again
If your home’s new furnace isn’t working the way you hoped, don’t just put up with it. The team at On The Mark has the skills and experience to quickly and accurately diagnose and repair virtually any home heating issue, whether the problem is with the furnace itself or somewhere else in your home. To learn more or to schedule a heating service appointment today, get in touch.
We're Ready to Help!
Need service for your home? Book an appointment online to receive fast reliable service!
Schedule Now Schedule Now5 Star Rating | 900+ Google Reviews
Hear from your neighbors about our heating, cooling and indoor air quality services in Schaumburg, IL.
